Upgraded Home Use Air Staple Nail Gun Woodworking Ceiling Installation Sofa Installation Stapler 1013jc Nailer

• Customization: Available
• Applications: Carpentry, Decking, Framing, Roofing, Siding Installation, Trim Work
• Certification: CE, ISO9001
• Model NO.: 1013JC Pneumatic Stapler
• Condition: New
• Customized: Customized
• Jam Clearing: Tool-free
• Nail Length: 6-13mm
• Operating Pressure: 70-120 psi
• Trigger Type: Contact trigger
• Guage: 20 Ga
• Weight: 0.95kg
• Air Pressure: 4-7kgf/Cm2
• Width: 1.14mm
• Thickness: 0.6mm
• Capacity: 100 PCS
• Fitting Tube: 6mm
• Outside Crown: 11.2mm
• Length: 6-13mm
• Transport Package: Box+Carton, OEM
• Specification: 100PCS
• Trademark: BED, HUAJIAN
• Origin: China
• Production Capacity: 10000boxes/Month

Product Description

Product Review

1013JC Pneumatic Stapler

The stapler uses 20 Gauge, 11.2mm crown staples and drives 6mm through 13mm length.

· Perfect stapler for auto and marine vinyltrim, upholstery, small furniture repairs, picture frames and many more useful applications.
· Tool-free depth adjusts.
· 360° adjustable exhaust.
· non-marring tip and comfortable grip allow for a user-friendly experience.
· Long nose design for tight space.

Suitable Nails

 

1006J-1013J Staple

This product has been made of high quality galvanized iron wire.

 

20 Guage 10J Series Fine Wire Staples

Outside Crown:11.2mm±0.1mm

Thickness:0.60±0.02mm

Width:1.14±0.01mm

Length:6mm 8mm 10mm 13mm

 

Product Description

Model	1013J Pneumatic stapler
Staples Type	20 Guage 10J series staples
Net Tool Weight	0.95kg
Load Capacity	100 pcs
Air Pressure	4-7kgf/cm²
Staples Crown	11.2mm
Staples Diameter	1.2mm
Staples Length	6mm-13mm

Product Feature

` Light weight body for easy operation.
` Low noisy have good feedback from suctoerm.
` Powerful strength and excellent durability.
` Long nose design for tight space.

Application Scenarios

` Furniture manke and repair.
` Cloth and wood connection.
` Picture frams.
` Decoration.

After-sale Service

No.	Symptom		Problems	Solutions
1.1	Air Leak	Air leak in the cylinder cap when tools don't work	1.Loose head valve piston seal or o-rings .	Check and replace the head valve piston set
			2.Worn or damaged o-ring or cylinder cap gasket under cylinder cap	Check and replace o-ring or cylinder cap gasket under the cylinder cap
1.2		Air leak in Trigger area when tools don't work	1.Damaged o-ring in trigger valve	Check and replace o-ring
			2.Damaged o-ring in trigger valve stem	Check and replace o-ring
			3.Dirt in the trigger valve	Check and clean the trigger valve
1.3		Air leak in cylinder cap when tools are working	1.Damaged head valve piston o-rings	Check and replace o-rings
			2.Damaged seal under cylinder cap	Check and replace seal
1.4		Air leak in nose when tools are working	1.Worn or damaged bumper	Check and replace bumper
			2.Loose driver(piston unit) thread	Check and replace driver(piston unit)
1.5		Air leak in Trigger area when tools are working	1.Worn or damaged trigger valve head	Check and replace trigger valve head
			2.Damaged head valve piston o-rings	Check and replace head valve piston o-rings
2	Failed to get driver(piston unit) back to the correct position completely.		1.The driver(piston unit) is not straight or the driver guide(nose) is wrong assembled.	Straighten the driver(piston unit) or verify driver guide(nose) and magazine
			2.Worn or damaged nozzle	Check and replace nozzle
			3.The space between piston o-ring and cylinder is too tight.	Check if the cylinder is adequate lubrication or replace the o-ring on the piston.
3	Work weakly and sluggishly		1. Worn or damaged piston o-ring	Check and replace piston o-ring
			2.Inadequate lubrication for head valve piston o-rings or too tight head valve piston o-rings	Place 2 or 6 drops of oil on o-rings or replace head valve piston o-rings
			3.Dirt in the nozzle	Check and clean the nozzle
4	Tool jams frequently		1.Damaged or Worn driver (piston unit)	Check and replace driver (piston unit)
			2.Damaged or Worn driver guide (nose)	Check and replace driver guide (nose)
			3.Driver guide cover is bent,so the space between driver guide cover and driver guide is too big	Check and replace driver guide cover
5	Nail can not be shot		1. Driver (piston unit) can't return to the correct position.	Refer to no. 1 Symptom
			2.Driver guide(nose) can not match magazine well	Check and correct the position between driver guide(nose) and magazine
			3.Worn or damaged nail pusher compression spring	Check and replace nail pusher compression spring

Company Profile

FAQ

1.Q:Do you have your own production factory?
A:Yes,we not only have our own factory,We also have a cooperative relationship with more than one hundred factories in China.

2.Q: Can you send us samples?
A: We are pleased to send you the sample to test the quality and market.

3.Q: About your products, could you do it OEM?
A: Yes, OEM service is available.

4.Q: Do you also provide spare parts of pneumatic tools?
A: Once we confirm the models you'd like to order, we will send you the diagram for checking and also suggest you some easy-broken parts.

5.Q: For the product, could you spray other color of painting?
A: Yes, color can be customized.

6.Q: What's the delivery time?
A: It usually takes about 20-30 working days to produce one order.

7.Q: How is the payment terms?
A: Normally T/T 30% in advance and T/T 70% before shipment.

8.Q: Can I mix different models in one container?
A: Yes, different models can be mixed in one container, but the quantity of each model should not be less than MOQ.

9.Q: How does your factory do regarding quality control?
A: We always pay great attention to quality control from the very beginning and every product was tested piece by piece before delivery.

10.Q: Do you have quality certification?
A: Yes, we have CE, SGS,ISO, ect.